Skip to content

How To Change Oakley Lenses

Oakley lenses can be easily replaced with the correct tools. The lenses are held in place by screws that can be tightened or loosened with a special tool. The process is simple and can be completed in a few minutes.

How To Change Oakley Lenses

Oakley sunglasses are designed with interchangeable lenses to allow the wearer to adapt to a variety of lighting conditions. The lenses can be changed by removing the screws on the frame with a special tool or a coin. There are a variety of lens colors and tints available from Oakley, and each lens is treated with a hydrophobic and oleophobic coating to resist water and fingerprints.

To change the lenses in your Oakleys, you will need a lens removal tool, a microfiber cloth, and your new lenses.

  • Put on the new lenses, making sure they are in the correct
  • Wipe the frames clean with a cloth
  • Remove old lenses by unscrewing the frames from the lens
  • Take out the old lenses and discard them

– Oakley lenses can be changed by removing the screws on the frame – The new lens can then be slipped into the frame and the screws replaced – If a replacement lens is not available, a local optician may be able to cut a new lens to fit – Oakley also produces a range of replacement lenses in different colours and tints


Frequently Asked Questions

How Do I Fix My Oakley Sunglasses?

If your Oakley sunglasses are not fitting well, the first step is to adjust the nose pads. To do this, pinch the nose pads together and then slide them up or down until they are in the desired position. If the sunglasses still feel too tight or loose, you may need to tighten or loosen the screws on the hinges.

How Do You Remove Oakley Sunglass Arms?

Oakley sunglasses arms can be removed by using a small flat head screwdriver. Gently pry the arms away from the frame and they should come off.

Are Oakley Lenses Easy To Replace?

Oakley lenses are designed to be easily replaced. The lenses are held in place by a few small screws, and the entire process can be completed in a few minutes.

How Do You Put New Lenses In Oakley Sunglasses?

Oakley recommends that you take your sunglasses to an authorized dealer for lens replacement.

How Do You Put Lenses In Sunglass Frames?

There are a few different ways to put lenses in sunglass frames. One way is to use a lens press, which is a tool that fits over the lens and the frame and uses pressure to push the lens into the frame. Another way is to use a lens holder, which is a tool that holds the lens in place while you put the frame on.

How Do You Pop An Oakley Arm Back In?

If an Oakley arm pops out of the hinge, try to reattach it by pushing it back in and twisting it clockwise. If that doesn’t work, remove the screws on the hinges with a screwdriver and put the arm back in place. Reattach the screws and test the sunglasses to make sure they are still functional.

How Do You Put Lenses In Oakley Frames?

Oakley frames have a groove that the lens is meant to snap into. There are also alignment marks on the frame and lens that should be matched up before snapping the lens into place.


Taking Everything Into Account

There are a few ways that you can change your oakley lenses. You can go to an oakley retailer, or you can order replacement lenses online. You will need to know the measurements of your old lenses in order to order the new ones.

Leave a Reply

Your email address will not be published. Required fields are marked *